– Output signal: 125 kHz
– Compatible with one- or two-pole circuits
– Automatic, manual and UAC measuring modes
– Locates hidden cables, wires or pipes
– Helps identify short circuits and fuses
– Includes alligator clips, measuring tips, test leads and ground rod
Technical specification
| Output | 125 kHz |
| External Voltage Identification Area | DC 12 … 400 V ± 2.5%; AC 12 … 400 V (50 … 60 Hz) ± 2.5% |
| Display | LCD |
| Maximum Voltage | Max. 400 V AC / DC |
| Overvoltage Category | CAT III 300 V |
| Pollution Degree | 2 |
| Power Supply | 9 V battery |
| Power Consumption (minimum voltage) | approximately 31 mA |
| Power Consumption (maximum voltage) | about 115 mA |
| Backup | F 0.5 A 500 V, 6.3 mm x 32 mm / 0.24 x 1.25in |
| Operating Conditions | 0 … +40 ° C/+32 … +72 ° F rel. Humidity <80% |
| Storage Conditions | -20 … +60 °C /+12 … +92 ° F rel. Humidity <80% |
| Dimensions | 190 mm x 89 mm x 42.5 mm 7.48 in x 3.50 in x 1.67 in |
| Weight | 420 g / 0.92 lbs (including battery) |
Technical specification for cable detector (receiver)
| Detection Depth | depends on material and the particular application |
| Pole Application | about 0 … 2 m / 0 … 6.56 ft |
| Bipolar Application | about 0 … 0.5 m / 0 … 1.64 ft |
| Simple Loop | Up to 2.5 m / 8.2021 ft |
| Grid Voltage Detection | about 0 … 0.4 m / 0 … 1.31 ft |
| Display | LCD |
| Power Supply | 6 x 1.5V AAA batteries |
| Power Consumption (minimum voltage) | about 32 mA |
| Power Consumption (maximum voltage) | approximately 89 mA |
| Environmental Conditions | 0 … +40 °C / +32 … +72 ° F rel. Humidity <80% |
| Storage Conditions | -20 … +60 °C / +12 … +92 ° F rel. Humidity <80% |
| Dimensions | 241.5 mm x 78 mm x 38.5 mm 9.5 in x 3.07 in x 1.51 in |
| Weight | 350 g / 0.77 lbs (including batteries) |
